Master controller - Danfoss Icon - Master Controller, 24V 10 channels
Danfoss Icon Master Controller 24 V is the central part of the heating control system.
It has 10 channels for connecting drives and thermostats.
Functional features of the system:
Automatic balancing (PWM +), which provides the hydraulic balancing of the system by the controller, based on the actual need for heating in a particular room.
It does not require pre-configuration on the collector.
Possibility of regulation On / Off
Possibility to connect NC / NO drives (normally closed / normally open).
Switching to cooling mode (expansion module required).
Support for 2-, 3- or 4-pipe systems in various configurations.
The temperature control of the water supplied to the system (an expansion module is required) can be set either to maintain a constant temperature or to control the temperature in accordance with the heat consumption in the rooms.
230 V output with protective earth for the circulation pump.
230 V output (for example, for always on" mode).
Signal output for heating demand (e.g. for potential-free relay).
The system can be made wireless by adding a radio module (required for wireless systems).
Communication via power cable (for wired thermostats 24 V).
Possibility of simultaneous use of wired and wireless thermostats in one system.
Mobile application for devices running iOS and Android (requires Icon App module).
...
